Pressed Cane
For chair seats and backs where there is a groove around the edge of the seat and the cane is held in place by spline. When ordering pressed cane, add two inches to the length and width or diameter for proper sizing. Tools needed include: spline chisel, 1 package of 5 caning wedges, glue, a sharp trimming tool and a small hammer. To determine the correct size of cane you need, measure the distance from the CENTER of one hole to the CENTER of the next hole. It will be 3/8″, 7/16″, 1/2″, 5/8″, 3/4″ or 1″. If you are in doubt about sizes, send a sample from the old chair & we will match it. Click here to view the Pressed in Cane instructional video Prices for pressed cane vary with the width you choose. Please choose your width and then your length, you’ll see the adjustment in price for each size. You must order in full foot increments, such as 1 foot, 2 feet, 3 feet etc.